Samsung 5 series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

Contents

English - 23Setting Up Anynet+Press the TOOLS button to display the Tools menu. You can also display Anynet+ menuby selecting Tools → Anynet+(HDMI-CEC).SetupAnynet+(HDMI-CEC) → Off / OnTo use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operationsare deactivated.Auto Turn Off → No / YesSetting an Anynet+ Device to turn Off Automatically when the TV is Turned OffThe active source on the TV remote must be set to TV to use the Anynet+ function.If you set Auto Turn Off to Yes, connected external devices are also turned off when theTV is turned off. If an external device is still recording, it may or may not turn off.Switching between Anynet+ Devices1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).2. Press the ▲ or ▼ button to select Device List, then press the ENTERE buttonAnynet+ devices connected to the TV are listed. If you cannot find a device you want,press the red button to scan for devices.Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device Listmenu appears.3. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. Itis switched to the selected device.Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected tothe TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button tosearch for the connected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the Device List.Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) Menu Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of theDVD recorder will appear.(device_name) Operation Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the playmenu of the DVD recorder will appear.Record: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that support therecording function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).¦T❑NNN¦NNNNNNNNView TVDevice ListRecord : DVDRDVDR OperationReceiver : OnSetupU Move E Enter R ReturnDevice ListSetupU Move E Enter R ReturnSetupAnynet+ (HDMI-CEC) : OnAuto Turn Off : YesU Move E Enter R ReturnAnynet+(HDMI-CEC) ►Application