English - What is Anynet+?Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controllingall connected AV devices through the Anynet+ menu when Samsung Electronics AV devices areconnected.Connecting Anynet+ Devicesthe Anynet+ system supports AV devices supporting Anynet+ only.Check if there is an Anynet+ mark on the AV device to be connected to the tV.to directly connect to tVConnect the [HDMI 1],[HDMI 2] or [HDMI 3] jack onthe TV and the HDMI OUT jackof the corresponding Anynet+device using the HDMI cable.to connect to home theater1. Connect the [HDMI 1],[HDMI 2] or [HDMI 3]jack on the TV and theHDMI OUT jack of thecorresponding Anynet+device using the HDMIcable.2. Connect the HDMI IN jackof the home theatre andthe HDMI OUT jack of thecorresponding Anynet+device using the HDMIcable.Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital AudioInput on the receiver.Connect only one receiver.You can listen to 5.1 channel sound through the home theatre’s speakers. Otherwise, you can onlylisten to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) ofthe home theatre and the TV correctly to listen to TV sound through the home theatre. However, youcannot listen to sound from the BD recorder that is sent to the home theatre via the TV in 5.1 channelsound because the TV outputs only 2 channel stereo sound. Please see the manual for the hometheatre.You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not supportAnynet+ functions.Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.Anynet+ supports up to 8 AV devices in total.➣➣➣➣➣➣Optical CableSERSERtV Anynet+ Device 1 Anynet+ Device 2Anynet+ Device hDMI 1. Cable hDMI 1. CablehDMI 1. CablehDMI 1. Cablehome theatreAnynet+ Device 1 Anynet+ Device 2 Anynet+ Device SERSERtVhDMI 1. Cable hDMI 1. Cable hDMI 1. Cable