English - 16. Press the ENTER button.Press the ▲ or ▼ button to select “Auto”, then Press the ENTER button.The message “Set to daylight saving time.” is displayed.If you select “Manual”, “Set current date and time” is displayed.(See page 45)7. Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTERbutton. The message “Select the time zone in which you live.” is displayed.8. Press the ▲ or ▼ button to highlight the time zone for your local area.Press the ENTER button. If you have received a digital signal, the timewill be set automatically. If not, see page 45 to set the clock.9. The message “Enjoy your watching.” is displayed.When you have finished, press the ENTER button.If you want to reset this feature...1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.2. Press the ENTER button again to select “Plug & Play”.For further details on setting up options, refer to the pages 12~13.The “Plug & Play” feature is only available in the TV mode.➣Changing ChannelsUsing the Channel Buttons1. Press the CH or CH button to change channels.When you press the CH or CH button, the TV changes channels insequence.You will see all the channels that the TV has memorized. (The TV musthave memorized at least three channels). You will not see channels thatwere either erased or not memorized. See page 16 to memorize channels.Using the Number Buttons1. Press the number buttons to go directly to a channel. For example, to selectchannel 27, press 2, then 7.For quick channel change, press the number buttons, then press theENTER button.➣➣Plug & PlaySet the Clock Mode.Clock Mode : AutoAutoManualSkipEnterMovePlug & PlaySet to daylight saving time.DST : AutoOffOnSkipEnterMovePlug & PlayEnjoy your watching.OKSetup Plug & Play ►Language : EnglishTimeV-ChipCaptionExternal SettingsEntertainment : OffEnergy Saving : OffPlug & PlaySelect the time zone in which you live.NewfoundlandAtlanticEasternCentralMountainPacific SkipEnterMove
