English - 20SouNDConfiguring the Sound MenuMode → Standard / Music / Movie / Clear Voice / CustomPress the TooLS button to display the Tools menu. You can also set the sound mode byselecting Tools → Sound Mode.Standard: Selects the normal sound mode.Music: Emphasizes music over voices.Movie: Provides the best sound for movies.Clear Voice: Emphasizes voice over other sounds.Custom: Recalls your customized sound settings.EqualizerThe sound settings can be adjusted to suit your personal preferences.Mode: Selects the sound mode among the predefined settings.Balance L/r: Adjusts the balance between the right and left speaker.100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.reset: Resets the equalizer settings to the default values.SRS TruSurround HD → Off / OnSRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over twospeakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,including internal television speakers. It is fully compatible with all multichannel formats.Press the TooLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools → SRS TSHD.Audio LanguageYou can change the default value for audio languages. Displays the language information for the incoming stream.While viewing a digital channel, this function can be selected.You can only select the language among the actual languages being broadcast.Audio Format → MPEG / Dolby DigitalWhen sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speeddifference between the main speaker and the audio receiver. In this case, use the TV Speaker function.While viewing a digital channel, this function can be selected.The Audio Format appears according to the broadcasting signal.Audio DescriptionThis is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles theAudio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn theAudio Description On or Off and control the volume.Press the AD button on the remote control to select off or on.Audio Description → Off / OnTurn the audio description function on or off.VolumeYou can adjust the audio description volume.Volume is active when Audio Description is set to on.While viewing a Digital channel, this function can be selected.Auto Volume → Off / OnEach broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel ischanged. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when themodulation signal is high or by raising the sound output when the modulation signal is low.¦❑T●●●●●❑●●●●❑T❑NN❑NN❑O■■NN❑Mode : Custom ▶EqualizerSRS TruSurround HD : OffAudio Language : ----Audio Format : ----Audio DescriptionAuto Volume : OffSound
