English - 16OperationTurning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.➢ It may take a while when your TV starts.Plug & Play FeatureThe first time you turn on your new TV, choose your basic settings for language, input source and channels, andtime of day using the plug and play feature. The TV will store these settings in memory. Storing the channels inmemory will allow you to scan the stored channels rather than have to enter their digits each time you want tochange channels.When the TV is initially powered on, basic settings proceed automatically:1 Press the POWER button on the remote control.The message Menu Language, Store Demo, Channels and Time will beset. is automatically displayed.2 Press the ENTER button to enter the language.Press the ▲ or ▼ button to select language, then press the ENTER button.The message Select “Home Use” when installing this TV in your home. isautomatically displayed.➢ The Screen Saver is activated if there is no remote control key input forlonger than 1 minute while Plug & Play is running.➢ The Screen Saver is activated if there is no operating signal for longer than15 minutes. Press the ◄ or ► button to select Store Demo or Home Use, then press theENTER button.➢ We recommend setting the TV to Home mode for the best picture in yourhome environment.➢ Store Demo mode is only intended for use in retail environments.➢ If the unit is accidentally set to Store Demo mode and you want to returnto Standard (Home Use) mode, press and hold the Volume button, thenpress the MENU button on the TV for 5 seconds.4 Press the ▲ or ▼ button to memorize the channels of the selected connection,then press the ENTER button.➢ Air: Air antenna signal.Cable: Cable antenna signal.Auto: Air and Cable antenna signals.➢ In Cable mode, you can select the correct analog signal source amongSTD, HRC, and IRC by pressing the ▲, ▼, ◄, ► button, then press theENTER button. If you have Digital cable, select the signal source for bothAnalog and Digital. Contact your local cable company to identify the type ofcable system that exists in your particular area.Continued...Plug & PlayMenu Language, Store Demo, Channels and Time willbe set.EnterOKPlug & PlaySelect Language of the OSD.Menu Language : English ►EnterPlug & PlaySelect “Home Use” when installing this TV in yourhome.Home UseStore DemoEnterMovePlug & PlaySelect Language of the OSD.EnterMenu Language : EnglishMoveEnglishEspañolFrançaisSkipEnterPlug & PlaySelect the Antenna source to memorize.AirCableAutoStartStartMoveStartPlug & PlaySelects the cable system.AnalogDigitalHRC IRCHRC IRCSkipEnterSTDMoveStartSTD
