Samsung 4 Series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

✎ You can adjust and store settings for each external device you haveconnected to an input on the TV. Picture Sizes available by InputSource are listed below:Input Source Picture SizeATV, AV, Component (480i, 480p) 16:9, Zoom1,Zoom2, 4:3DTV (1080i, 1080p), Component (1080i,1080p), HDMI (720p, 1080i, 1080p)16:9, Wide Fit, 4:3,Screen Fit■ Digital Clean View: If the broadcast signal received by your TV isweak, you can activate the Digital Clean View feature to reduce anystatic and ghosting that may appear on the screen.✎ When the signal is weak, try all the Digital Clean View options untilthe TV displays the best picture.■ MPEG Noise Filter: Reduces MPEG noise to provide improvedpicture quality.■ HDMI Black Level: For HDMI signals, select the black level to adjustthe screen depth. Low make blacks look darker.✎ Available only in HDMI mode (RGB signals).■ Film Mode: Sets the TV to automatically sense and process filmsignals from all sources and adjusts the picture for optimum quality.✎ Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i)and HDMI (480i / 1080i).■ LED Clear Motion: Removes drag from fast scenes with a lot ofmovement to provide a clear picture.Picture ResetResets the picture settings to their factory defaults.Sound MenuMode t■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency sounds to allow abetter listening experience for the hearing impaired.EqualizerAvailable in Standard sound mode only.■ Balance L/R: Adjusts the balance between the right and left speaker.■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):Adjusts the loudness of specific bandwidth frequencies.■ Reset: Resets the equalizer to its default settings.DTS TruSurroundAvailable in Standard sound mode only.DTS TruSurround is a patented DTS technology that solves the problemof playing 5.1 multichannel content through two speakers. TruSurrounddelivers a compelling, virtual surround sound experience through anytwo-speaker playback system, including internal television speakers. It isfully compatible with all multichannel formats.Preferred LanguageDigital channels only.Digital-TV broadcasts can transmit many audio tracks simultaneously (forexample, simultaneous translations of a program into foreign languages).✎ You can only select a language from among the ones beingbroadcast.Multi-Track SoundAnalog channels only.■ Mono: Select for channels that are broadcasting in mono or if you arehaving difficulty receiving a stereo signal.■ Stereo: Select for channels that are broadcasting in stereo.■ SAP: Select to listen to the Separate Audio Program, which is usuallya foreign-language translation.✎ Depending on the program being broadcast, you can listen toMono, Stereo or SAP.Auto VolumeBecause each station has its own broadcasting conditions, thevolume may fluctuate each time you change the channel. This featureautomatically adjusts the volume of a channel by lowering the soundoutput when the modulation signal is high or by raising the sound outputwhen the modulation signal is low.SPDIF Output for 32" and above modelsThe SPDIF (Sony Philips Digital InterFace) outputs an uncompresseddigital audio signal when you connect the digital audio jack on the backof the TV to a digital audio in jack on a receiver or home theater.■ Audio Format: You can select the Digital Audio output (SPDIF)format. The available Digital Audio output format may differ dependingon the input source.✎ By connecting the TV to a receiver or home theater with DolbyDigital and 5.1ch speakers and selecting Dolby Digital, you canmaximize your interactive 3D sound experience.■ Audio Delay: Lets you correct timing mismatches between the audiotrack and the video when you are watching the TV and listening todigital audio output from the TV through an external device such asan AV receiver. When you select Audio Delay, a slider appears. Usethe left and right arrow buttons to adjust the slider. Press ENTEREwhen done (0ms ~ 250ms).Speaker SelectIf you are listening to the sound track of a broadcast or movie through anexternal receiver, you may hear a sound echo caused by the difference indecoding speed between the TV’s speakers and the speakers attachedto your audio receiver. If this occurs, set the TV to External Speaker.✎ When you set Speaker Select to External Speaker, the TV’sspeakers are turned off. You will hear sound through the externalspeakers only. When you set Speaker Select to TV Speaker boththe TV’s speakers and the external speakers are on. You will hearsound through both.✎ When Speaker Select is set to External Speaker, the VOLUMEand MUTE buttons will not operate and the sound settings will belimited.✎ If there is no video signal, both the TV’s speakers and the externalspeakers will be mute.Visual ImpairedDigital channels only.Adds verbal description to the main audio to help the visually impaired.Sound ResetResets all sound settings to the factory