Samsung 4 Series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

Troubleshooting and MaintenanceTroubleshootingIf the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tipsapply, visit “www.samsung.com”, then click on Support, or call Samsung customer service centre.Picture Quality• First of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU -Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the sourceor signal.The TV image does not look as good as it did in the store.• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD(high definition) picture quality.• Cable/Satellite subscribers: Try digital stations from the channel line up.• Aerial connection: Try HD stations after performing Auto tuning.• Many HD channels are up scaled from SD (Standard Definition) contents.• Adjust the Cable/Set top box video output resolution to 1080i or 720p.• Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal.The picture is distorted: macro block, small block, dots, pixelization error.• Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and actionmovies.• Low signal level or bad quality can cause picture distortion. This is not a TV issue.• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV.Colour is wrong or missing.• If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect orloose connections may cause colour problems or a blank screen.There is poor colour or brightness.• Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness)• Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy Saving)• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture)English - 12UK5100B_XN_BN68-07346V-02_L04.indb 12 2016-07-11 오후 1:07:41