Samsung 2.0070529160005e16 Instruction Manual

Also see for DVD-R160: Update guide Instruction manual

Contents

Connecting &Setting Up18 - EnglishStep 2 : Connecting HDMI/DVI to a TVIf your TV has a HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality image andsound.Connecting to a TV with an HDMI JackUsing an HDMI-HDMI cable (not included), connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMIIN jack of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD Recorderappears on your TV screen.HDMI OUTCaution To watch through the HDMI output, set the digital audiooutput to PCM. (See page 34-35) Depending on the HDMI device(TV/HDMI Receiver) you use,audio may not be supported. If your TV does not supportDolby digital/DTS, Audio output is not available when you setthe Digital output to Bitstream or select DTS On in the Audiosetup menu. In this case, set the digital audio output to PCMor DTS Off. If you use an HDMI cable to connect a Samsung TV to theDVD recorder, you can operate the recorder using the TVremote control. (This is only available with SAMSUNG TVsthat support Anynet + (HDMI-CEC). ) (See pages 31) Please check the logo (If you TV has anlogo,then it supports Anynet+ function.) The DVD-R160 supports 1080p resolution. This is onlyavailable when an HDMI cable is connected to a TV thatsupports 1080p resolution.