34.3.2. Colours of cables for I/O PT0083:SIGNAL LEADS NUMBER(FOR JZ-500 108G0,5)IN 1 1IN 2 2IN 3 3IN 4 4GND IN 5OUT 1 6OUT 2 7OUT 3 8OUT 4 9COMMON (10) YELLOW GREEN34.3.3. Installing method in PUE 5 terminalWE 4 modules are equipped in one cable, for inputs and outputs.Installing procedure:1. Unplug the terminal from mains;2. Unscrew and take off the back wall of the housing;3. Install a PG9 gland and led cable PT0083 through it;4. Connect the PT0083 cable to the J24 connector for inputs orto the J23 for outputs, on the main board of PUE 5.5. The cable connect to the group of wires (unhook band clipsfastening the group of wires, lay the cable and hook the bandclips). Band clips of multiple usage;6. Screw down the back wall.Installing WE4 modules on the main board of PUE 5- 126 -
