Pioneer VSX-D814 Operating Instructions Manual

Contents

Setting up the receiver0742EnChapter 7:Setting up the receiverChoosing your receiver setupTo ensure the best possible surround sound,be sure to complete the following set upoperations. This is particularly importantwhen using DTS and Dolby surround. Youonly need to make these settings once (unlessyou change the placement of your currentspeaker system or add new speakers, etc.).Refer to the following pages for details oneach of the settings.• If you are using the Pioneer S-FCRW730speaker system, make sure the Subwoofersetting is set to YES and the Speakersetting is set to FS-CS-SS. You’ll also haveto change the Crossover frequency settingto 200Hz.1 Press RECEIVER.2 Use or to choose the option youwant to adjust.It will be easiest to adjust each of the settingsin turn, following the order below (and on thefollowing pages). The current setting is shownfor each option as you cycle through thedisplay.Speaker setting (page 43)Specify the number and type of speakersyou have connected.Surround back speaker setting(page 44)Specify your surround back speaker/surround back subwoofer setup.Subwoofer setting (page 44)Specify how the subwoofer is used.Crossover frequency setting (page 44)Determine which frequencies will be sentto the subwoofer (or large speakers).LFE attenuator setting (page 45)Choose the attenuator level for the LFEchannel.Front left speaker distance setting(page 45)Specify the distance from your listeningposition to your front left speaker.Center speaker distance setting(page 45)Specify the distance from your listeningposition to your center speaker.Front right speaker distance setting(page 46)Specify the distance from your listeningposition to your front right speaker.+10INPUT ATT FL DIMMER SR DISCMULTI CONTROLSETUPENTERTV CONTROLVOLDVD/LD TV/SAT DVR/VCR TV CONTCDINPUTSELECT TV CHTVVOLCD-R/TAPE TUNER RECEIVERENTERD.ACCESSTOP MENUDTV MENUCLASSMENUBANDRETURNGUIDET.EDITMCACCSETUP