Pioneer SGY-PM910ZWL User Manual

3EN IntroductionFeaturesThis product is a sensor system that analyzes the pedaling of a bicycle in realtime. It calculates the direction and intensity of the force acting on the pedalsand calculates pedaling efficiency.Description of components• Strain gauge unit :Detects the strain on the crank and calculates the direction and intensity of theforce on the crank.• Magnet:Used to detect the angle of rotation.• Transmitters:Send information from the strain gauge unit and the magnet to theCyclocomputer.Product mode• When using SGX-CA500, the firmware version is required to be 20150501.02.43 orhigher.• Pedaling monitor mode:When paired with Cyclocomputer SGX-CA500, the pedaling efficiency andcadence and other such properties can be measured. You can make maximumuse of the functions of this product.• Dual power meter mode:Left and right sensors are required. The actual power values of the left and rightsensors can be totaled and displayed and the cadence can be measured. Can beused with SGX-CA500 or with a Cyclocomputer that supports ANT+ from anothermanufacturer.• Single power meter mode:The power value of the left or right sensors can be doubled and displayed quicklyand the cadence can be measured. Can be used with SGX-CA500 or with aCyclocomputer that supports ANT+ from another manufacturer.