Pioneer PRA-BD11 Operating Instructions Manual

Also see for PRA-BD11: Supplementary guide Service manual

20PRA-BD11 / PRA-BD12EnUsing PRA-BD11Once the PRA-BD11 (SDI AES/EBU input board) has been installed in the DVD recorderexpansion slot, the furnished wires can be used to connect the board to the DVD recorder,thereby allowing use of the SDI input and AES/EBU input connectors.This section explains how to select inputs for the SDI and AES/EBU input connectorsthat have been made available on the DVD recorder as a result of installation of the PRA-BD11.For information on recording, preview and other operations after selecting inputs, seethe DVD recorder Operating Instructions.Note:SDI audio input is available only when SDI video input has been selected. When “SDI” isselected on [A Input], [V Input] is automatically set to “SDI”.When [V Input] is set to something other than “SDI”, [A Input] is automatically set to“RCA” even if “SDI” is selected for [A Input].Selecting SDI video inputDisplay the DVD recorder’s FunctionMenu, and select “SDI” from [VInput] on the STATUS section.The “SDI” menu is added to [VInput] and becomes available forselection when this unit is installed.STATUS section = [V Input]Selecting SDI audio inputDisplay the DVD recorder’s FunctionMenu, and select “SDI” from [AInput] on the STATUS section.The “SDI” menu and “AES/EBU”menu are added to [A Input] andbecome available for selectionwhen this unit is installed.STATUS section = [A Input]