| 
1523) Adjusting SCREEN (screen position)The items that can be adjusted here are H.POSITION, V.POSITION, CLOCK, PHASE and V.SIZE.1 Enter integrator mode and switch to the input (INPUT 1~5)you want to adjust.The set ID will be displayed on the upper right where the“ – –“ mark is.Select SCREEN and the item to adjust.When DEFAULT is selected on screen 1, all adjustmentvalues for SCREEN will be restored to the factory presetvalues.2 Make the necessary adjustments.(NOTE) CLOCK and PHASE can only be adjusted duringpersonal computer signal input.Make adjustments using the 2 and 3 buttons on the remotecontrol or the main unit’s operating panel.The values adjusted here will be the initial values for menumode. Press the SET button to return to screen 1. 0 to 255 for H. POSITION, V. POSITION and CLOCK (initial value: 128)0 to 127 for V. SIZE (initial value: 0)0 to 63 for PHASE (initial value: 32) For the sake of efficiency, make adjustments in the following order:V.POSITION = H.POSITION = CLOCK = H.POSITION = PHASE = H.POSITIONScreen 1Screen 2]]HO:::::. I T I ONPOSZ EEI T I ONV S. I.KVCPCFDE AU L TOLP SAHS1 2 81 2 81 2 83 10I NPUT 1I NTEGRATOR MENU ––ENTER EXITMENUSETSELECTPICTURE WHITE BAL SCREEN SET UP OPTIONI T I ONO : 821PH. SADJUST EXITSETMENUSETSELECTIntegrator Mode2) Adjusting WHITE BALANCEThe items that can be adjusted here are R HIGH, G HIGH, B HIGH, R LOW, G LOW and B LOW.1 Enter integrator mode and switch to the input (INPUT 1~5)you want to adjust.The set ID will be displayed on the upper right where the“– –“ mark is.Select WHITE BALANCE and the item to adjust.When DEFAULT is selected on screen 1, all adjustmentvalues for WHITE BALANCE will be restored to the factorypreset values.2 Make the necessary adjustments.Make adjustments using the 2 and 3 buttons on the remotecontrol or the main unit’s operating panel.Press the SET button to return to screen 1. 0 to 255 for each itemScreen 1Screen 2]]RI::::::. HHH I GWWHG L..O.GGBHIWB LOFDE AU L TH.R OL.G2 5 52 5 52 5 51 2 81 2 81 2 8I NPUT 1I NTEGRATOR MENU ––ENTER EXITMENUSETSELECTPICTURE WHITE BAL SCREEN SET UP OPTIONHI : 552HR. GADJUST EXITSETMENUSETSELECT |
