Before you start0430EnWatching a DVDRemember that when using the remote to control thesupplied HDD/DVD recorder, you should point theremote towards the display unit, not the recorder itself.1 Switches on the system.2 Set the remote control to HDD/DVR mode.Press DVR (HDMI 1) to set the remote control to HDD/DVR control mode in order to operate the HDD/DVDrecorder.3 Switch on your TV.Turn on your TV and make sure that it is set to the HDMIvideo input.4 Press to select DVD.5 Press on the HDD/DVD recorder to openthe disc tray.6 Load a disc.Load a disc with the label side facing up, using the disctray guide to align the disc (if you’re loading a double-sided DVD disc, load it with the side you want to playface-down).7 Press to start playback.See Basic playback on page 103 for more on playingdiscs.8 Adjust the volume.Listening to a CD1 Switches on the system.2 Set the remote control to HDD/DVR mode.Press DVR (HDMI 1) to set the remote control to HDD/DVR control mode in order to operate the HDD/DVDrecorder.3 Press to select DVD.4 Load a CD and start playback (page 104).5 Adjust the volume.Watching a title recorded on the HDD1 Switches on the system.2 Set the remote control to HDD/DVR mode.Press DVR (HDMI 1) to set the remote control to HDD/DVR control mode in order to operate the HDD/DVDrecorder.3 Switch on your TV.4 Press to select HDD.5 Start playback of the HDD title (page 104).6 Adjust the volume.Listening to the radio1 Switches on the system.2 Set the remote control to FM/AM mode.3 Tune to a station (page 35).The LCD screen changes to that for the radio, and youcan then operate the desired component.4 Adjust the volume.Press to stop playback.You can resume playback from the samepoint by pressing . (Press again tocancel the resume function.)Pauses playback, or restarts playbackwhen paused.Press to start scanning. Press repeatedlyto increase the scanning speed.ONDVRHDMI 1TVHDD/DVDOPEN/CLOSE SYSTEMVOLONDVRHDMI 1HDD/DVDSYSTEMVOLONDVRHDMI 1TVHDD/DVDSYSTEMVOLONFM/AM- +TUNESYSTEMVOL
