Pioneer LX01 Operating Instructions Manual

Also see for AS-LX70: Operating instructions Operating instructions Operating instructions Service manual Service manual

Contents

The Initial Setup menu 15153EnDigital TunerReplace Channels Next Screen Scans for digital channels and replaces all the channel presets with theresults. Before the scan starts you will need to select your country.After the scan is complete the recorder tells you whether any new channelswere found, and if so, how many.(You can cancel the scan before it has finished by pressing HOME MENU orRETURN. In this case, no channels are set.)If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.Add New Channels Next Screen Automatically scans for new digital channels.After the scan is complete the recorder tells you whether any new channelswere found, and if so, how many.(You can cancel the scan before it has finished by pressing HOME MENU orRETURN. In this case, no new channels are set.)Channel Sort Next Screen Use this screen to sort channel presets into your prefered order. Use the/// buttons to highlight the channel you want to move, pressENTER. Use the cursor buttons again to highlight the position you want tomove the channel preset to, then press ENTER again.(If there are more channel presets than will fit on one screen, you can selectthe next/previous page by highlighting the small triangular marks andpressing ENTER.)Channel Options Next Screen From this screen you can skip or lock channels. Locked channels will requirethe correct password to be entered before the channel can be watched. Usethe /// buttons to highlight a preference box and press ENTER totoggle the preference.To enter this screen, input the parental lock password when prompted (if onehas not yet been set then the password you enter becomes the parental lockpassword).Auto Skip Off • No channels are automatically skipped.Radio Radio channels are skipped when selecting channels.Data Data channels are skipped when selecting channels.Radio & Data Radio and data channels are skipped when selecting channels.Signal Check Next Screen Use this screen to check the signal level and quality of digital channels. Usethe / buttons to change the RF channel; select Add New Channelsthen press ENTER to scan for new channels; press HOME MENU to exit.Aerial Power On Power is supplied to the connected aerial (antenna) when this recorder is onor in standby.Auto Power is supplied to the connected aerial (antenna) only when this recorderis on.Off • This recorder does not supply power to the connected aerial (antenna).If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly, or it may be shorted. In eithercase, check the connection and try making the setting again.D.TV Language Next Screen From this screen you can set your Primary and Secondary Audio preferencefor multilingual digital broadcasts, your Primary and Secondary Subtitlepreference for programmes that are broadcast with subtitles, and yourTeletext language preference. Use the / buttons to highlight a field thenuse the / buttons to change it.Setting Options Explanation