Switching the soundmuting/attenuationYou can select the muting method when thevoice guidance is output.p When you use a cellular phone connectedwith Bluetooth technology (dialing, talking,incoming call), the audio source volume isalways muted independently of this setting.1 Display the “Initial Setting” screen.= For details, refer to Displaying the“Initial Setting” screen on page 124.2 Turn MULTI-CONTROL to select“Guidance”.3 Press the center of MULTI-CONTROL re-peatedly until the desired setting appearsin the display.Each press of MULTI-CONTROL changes thesettings as follows:! ATT:The audio source is attenuated automati-cally when the voice guidance is output.! Mute:The audio source is muted automaticallywhen the voice guidance is output.! Normal:The audio source volume does not change.p AV source volume returns to normal whenthe corresponding action is ended.Displaying the“Audio Menu” screenTo customize the audio settings, display the“Audio Menu” screen.1 Press the MODE button when the mapof the current location is displayed.The audio operation screen appears.2 Press the center of MULTI-CONTROL todisplay the function select screen.= For details, refer to Audio screen switchingoverview on page 80.3 Turn MULTI-CONTROL to select“Audio Menu”.4 Press the center of MULTI-CONTROL.The “Audio Menu” screen appears.1 2 3 41 Source iconShows which source has been selected.2 Screen title3 Function currently selected4 Setting value5 Turn MULTI-CONTROL to select one ofthe initial settings.Turning MULTI-CONTROL switches betweenthe functions in the following order:Fader (balance adjustment) —Preset Equalizer (equalizer adjustment) —P.EQ Setting1 (equalizer band and the level ofequalizer band) — P.EQ Setting2 (frequencyand Q factor) — Loudness (loudness) — Sub-Woofer1 (phase of subwoofer output) — Sub-Woofer2 (subwoofer setting) — Bass Booster(bass booster) — HPF (high pass filter) — SLA(source level adjustment)p When “Rear SP:F.Range” is selected in“S/W Control” and “Rear” is selected in“Preout”, “SubWoofer1” cannot be ad-justed.p When “SubWoofer1” is turned off, “Sub-Woofer2” cannot be adjusted.p You cannot select “SLA” when the FM tuneris selected as the AV source.Using balance adjustmentYou can select a fader/balance setting thatprovides an ideal listening environment in alloccupied seats.p When “Rear SP:S/W” is selected in “S/WControl”, front/rear speaker balance can-not be adjusted.En126Chapter26 Customizing preferences
