55Chapter 2 Setting a Route to Your DestinationChecking the Set RouteYou can check information about the route between your current location and your destination.You can select two methods: checking the passing streets with a list; and checking the shape ofthe route by scrolling the map along the route.This function is not available if your car is away from the set route.CautionThis function is not available if your car is away from the set route.Checking the set route with the map1 Press the DETOUR button on the Remote Control for more than two seconds.The screen to select the checking method appears.2 Select “Route Scroll” and click the OK button.The screen to select the point to start scrolling appears.3 Select the point to start scrolling, and click the OK button.You can select the following items:• Place of departure• Way point (If this is set. Way points already passed cannot be selected.)• Destination4 Move the joystick up or down to scroll the map.Change the scale of the map as necessary. If you move the joystick upward, you can scrollthe map forward, while moving it down scrolls the map backward.If you press down the joystick and hold for more than three seconds, you can scroll themap continuously. When the cursor reaches the departure point, waypoints or your desti-nation, scrolling stops. To start scrolling again, press down the joystick and hold for morethan three seconds. To stop scrolling, move the joystick to the opposite direction.5 Press the BACK button.You can return to the previous display.Current RouteCross Pointer
