138Storing the channelOnce stored in memory, you can easily select a desired channel from the P.CH RECALL.1 Press 5555 or ∞∞∞∞ to select “P.CH MEMORY” from the XM TUNER MENU, and pressA.MENU (AUDIO) button.2 Adjust channel with 2222 or 3333.3 Select a preset channel number with 5555 or ∞∞∞∞ and press A.MENU (AUDIO) button.4 If you want to preset channel one after another, use 5555 or ∞∞∞∞ to move to the next pre-set channel you want to use to store a channel, and perform the same operation.When you have finished, press BAND/ESC button to return to the source display.Display the ID CodeEach XM tuner is identified with a unique radio ID. You will need the radio ID when activat-ing XM service or when reporting a problem. How to display the ID code depends on thechannel select mode.Channel number select modeIf you select CH 000, the ID code is displayed.1 Select the “CH 000” with the 2222 / 3333.Channel category select modeRADIO ID is provided as a channel category for displaying the ID code.1 Select the Channel Category RADIO ID with the 5555 / ∞∞∞∞.➲ If you select another channel, display of the ID code is canceled.➲ Display of the ID code repeats displaying.RADIO ID and the ID code one after the other.Switching the DisplayEach XM channel has a channel number and channel name. XM programming also carriessong or program title, artist name and category, when available.1 Press DISPLAY button.Press DISPLAY button repeatedly to switch between the following settings.Channel name - Artist name/feature - Song/program title - Channel number - Channelcategory
