123Chapter 6 Combining and Using Pioneer AV EquipmentDAB status indicationsHow to listen to DAB1 Press SOURCE button to select the DAB tuner.2 Use VOL dial to adjust the sound level.Rotate to increase or decrease the volume.3 Press BAND/ESC button to select a band.Press BAND/ESC button until the desired band is displayed, DAB1, DAB2, DAB3.4 Press 2 or 3 to select a service.The service move up or down step by step.5 Press and hold 2 or 3 for one second and release to select an ensemble.Switching the display1 Press DISP button to select the desired display.Press DISP button repeatedly to switch between the following displays:Service Label and Preset channel list - Service Label and Service Component Label - Ser-vice Label and Dynamic Label - Service Label and Ensemble Label - Service Label andPTY Label.➲ With a service component that has no service component label or dynamic label, neither isdisplayed when you switch to service component label and dynamic label.Using dynamic labelDynamic label provides character information concerning the service component you’re cur-rently listening to. You can scroll the displayed information.➲ The tuner automatically memorizes the three latest dynamic label received, replacing textfrom the least recent reception with new text when it is received.Displaying dynamic label1 Press PAUSE on the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400) to displaydynamic label.➲ Press the PAUSE on the Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400) oncemore, or press the BAND/ESC button, and the dynamic label mode is canceled.➲ When no dynamic label is currently being received, “NO TEXT” is displayed.2 Press 2 or 3 to recall the three most recent dynamic label.➲ Pressing 2 or 3 switches between the current and the three dynamic label data dis-plays.➲ If there is no dynamic label data in memory the display will not change.Indicator StatusEXTRA The currently received service has a secondary service component.TXT The currently received service has a dynamic label.DAB When DAB reception is possible.