Using the direct controlYou can override audio settings to check for ef-fectiveness of your audio settings.! All audio functions are locked out duringthe direct control is on except VOLUME.1 Touch A.MENU and AUDIO and thentouch DIRECT.2 Touch a to turn the direct control on.# To turn direct control off, touch b.Using the Dolby Pro LogicDolby Pro Logic gives enhanced spatial and di-rectional effects, creating theater-like sense ofpresence and ambience.! If the source is a 2-channel LPCM audio ora 2-channel Dolby Digital audio and you se-lect SFC effects that are most applicablefor 5.1-channel audio (i.e., MUSICAL,DRAMA or ACTION), we recommend turn-ing Dolby Pro Logic on. On the other hand,when selecting SFC effects that are in-tended for use with 2-channel audio (i.e.,JAZZ, HALL or CLUB), we recommend turn-ing Dolby Pro Logic off.1 Touch A.MENU and AUDIO and thentouch NEXT.2 Touch DOLBY PL.3 Touch a to turn the Dolby Pro Logic on.# To turn Dolby Pro Logic off, touch b.NoteWhen playing a 2-channel mono source with ProLogic turned on, there may be occasions whenthe following will occur:! No audio is output if the center speaker set-ting is SMALL or LARGE and no center speak-er is installed.! Audio is heard only over the center speaker ifinstalled and the center speaker setting isSMALL or LARGE.Setting the speaker settingYou need to make with/without (or yes/no) andsize (bass reproducing capacity) selection/ad-justments depending on the installed speak-ers. The size needs to be set to LARGE (large)if the speaker is capable of reproducingsounds of about 100 Hz or below. Otherwiseselect SMALL (small).! Low frequency range is not output if thesubwoofer is set to OFF and the front andrear speakers set to SMALL or OFF.! It is imperative that non-installed speakersbe set to OFF.! Set the front or rear speaker to LARGE ifthe speaker is capable of reproducing basscontent, or if no subwoofer is installed.1 Touch A.MENU and AUDIO and thentouch NEXT.2 Touch SP SET.3 Touch a or b to select the speaker tobe adjusted.Each time you touch a or b selects the speak-er in the following order:FRONT (front speakers)CENTER (centerspeaker)REAR (rear speakers)SUB WOOFER (subwoofer)PHASE (sub-woofer setting)# You can switch to PHASE only when the sub-woofer has been set to ON.DigitalSignalProcessorEn72Section15
