+6 6 is displayed as the level is increasedor decreased.5 Touch b and then touch c or d to se-lect the desired frequency.Touch c or d until the desired frequency ap-pears in the display.Low: 4080100160 (Hz)Mid: 2005001k2k (Hz)High: 3.15k8k10k12.5k (Hz)6 Touch b and then touch c or d to se-lect the desired Q factor.Touch c or d until the desired Q factor ap-pears in the display.2W1W1N2NNoteIf you make adjustments, CUSTOM curve is up-dated.Adjusting bass and trebleYou can adjust bass and treble settings.! If EQ-EX function has been selected andonly when EQ-EX is turned on andCUSTOM is selected as the equalizercurve, you can adjust bass and treble set-tings. (Refer to Compensating for equalizercurves (EQ-EX) on page 72.)Adjusting bassYou can adjust the cut-off frequency and thebass level.! If SFEQ has been set to FRONT1, bass ad-justment affects only the rear output: frontoutput cannot be adjusted. (Refer to Settingthe sound focus equalizer (SFEQ) on page73.)1 Touch A.MENU and AUDIO and thentouch BASS.2 Touch c or d to select the desired fre-quency.Touch c or d until the desired frequency ap-pears in the display.4063100160 (Hz)3 Touch a or b to adjust the bass level.Each time you touch a or b increases or de-creases the bass level. +6 6 is displayed asthe level is increased or decreased.Adjusting trebleYou can adjust the cut-off frequency and thetreble level.! If SFEQ has been set to FRONT1 orFRONT2, treble adjustment affects only thefront output: rear output cannot be ad-justed. (Refer to Setting the sound focusequalizer (SFEQ) on page 73.)1 Touch A.MENU and AUDIO and thentouch TREBLE.2 Touch c or d to select the desired fre-quency.Touch c or d until the desired frequency ap-pears in the display.2.5k4k6.3k10k (Hz)3 Touch a or b to adjust the treble level.Each time you touch a or b increases or de-creases the treble level. +6 6 is displayed asthe level is increased or decreased.Adjusting loudnessLoudness compensates for deficiencies in thelow- and high-sound ranges at low volume.Audio AdjustmentsEn70Section15