Patton electronics SmartNode Series Software Configuration Manual

Also see for SmartNode Series: Software configuration guide Software configuration guide Software configuration guide Software configuration guide

Contents

Patton electronics SmartNode Series Software Configuration Manual Manual pdf 234 page image

Displaying SNMP related information 234SmartWare Software Configuration Guide 20 • SNMP configurationIn the following example the NMS running on host with IP address 172.16.224.44 shall be defined as SNMPtrap target. Since the NMS requires that SNMP message headers have a community of Not4evEryOne the secu-rity-name argument is set accordingly.node(cfg)#snmp target 172.16.224.44 security-name Not4evEryOneDisplaying SNMP related informationDisplaying the SNMP related configuration settings is often necessary to check configuration modifications orwhen determining the behavior of the SNMP agent.This procedure describes how to display information and configuration settings for SNMPMode: ConfigureExample: Displaying SNMP related informationThis example shows how to display SNMP configuration information.node(cfg)#show snmpSNMP Information:hostname : nodelocation : Wiring Closet, 3rd floorcontact : Bill Anybody, Phone 818 700 1504Hosts:172.16.224.44 security-name publicTargets:172.16.224.44 security-name Not4evEryOneCommunities:public access-right roNot4evEryOne access-right rwUsing the AdventNet SNMP utilitiesThe AdventNet SNMP utilities are a set of cross-platform applications and applets for SNMP and Web-basednetwork management. These utilities can be used for device, element, application and system management.The following tools are the most useful:• MibBrowser—used to view and operate on data available through a SNMP agent on a managed device• TrapViewer—used to parse and view the received trapsThe AdventNet MibBrowser is a complete SNMP MibBrowser that enables the loading of MIBs, MIB brows-ing, walking a MIB tree, searching MIBs and performing all other SNMP-related functions to users.Viewing and operating the data available through an SNMP agent on a managed device, e.g. a router, switch,hub etc., is made possible by using the MibBrowser.Step Command Purpose1node(cfg)#show snmp Displays information and configuration settings for SNMP