Panasonic WV-SP105 Installation Manual

Also see for i-Pro WV-SP102: Integration note Product catalog Comparison chart Specifications Datasheet

Contents

Panasonic WV-SP105 Installation Manual Manual pdf 26 page image

26Configure the network settingsInstall the softwareBefore installing the software, refer to the readme file on the provided CD-ROM first.Software included on the provided CD-ROM• Panasonic IP setting softwareConfigure the network settings of the camera. Refer to the following for further information.• Viewer Software "Network Camera View 4S"It is necessary to install the viewer software "Network Camera View 4S" to display images on aPC. Install the viewer software by double-clicking the "nwcv4Ssetup.exe" icon on the providedCD-ROM.Configure the network settings of the camera using thePanasonic IP setting softwareIt is possible to perform the network settings of the camera using the IP setup software on the pro-vided CD-ROM.When using multiple cameras, it is necessary to configure the network settings of each cameraindependently.If the Panasonic IP setting software does not work, configure the network settings of the cameraand the PC individually on the "Network" page of the setup menu. Refer to the OperatingInstructions (PDF) for further information.Important:• When using Microsoft Windows Vista, the "Windows Security Alert" window may be displayedwhen starting the IP setup software. In this case, disable "User Account Control" from the con-trol panel.• For the security enhancement, the MAC address/IP address of the camera to be configured willnot be displayed when around 20 minutes have passed after turning on the power of the cam-era. (When the effective period is set to "20min only" in the Easy IP setup)• Panasonic IP setting software is inoperable in other subnets via the same router.• This camera cannot be displayed or set with an older version of the IP setup software (version2.xx).