Panasonic WV-SP105 Installation Manual

Also see for i-Pro WV-SP102: Integration note Product catalog Comparison chart Specifications Datasheet

Contents

Panasonic WV-SP105 Installation Manual Manual pdf 16 page image

16InstallationConnect the safety wireIf an installation area has sufficient strength (☞ page 17), secure the provided safety wire to theinstallation area.If not, procure another wire that can substitute for the safety wire (accessory).The following is an example of safety wire connection.Important:• Be sure to install the safety wire. Ask your dealer for installation.• Take care so that the camera does not roll over. Do not remove the camera cover film until theinstallation is completed.• When the rear sheet* comes off, fit the sheet into the rear panel of the camera. (The rear sheetis not stuck to the camera.)Install on ceilingCamera mount bracket (locally procured) and the safety wire (accessory) will be used for installa-tion.z Bend the ring part and the ring neck of the safety wire (accessory).x Engage the safety wire (accessory) with the wire engaging hole.Safety wire(accessory)q Pass the ring part of thesafety wire (accessory)through the wire engag-ing hole.w Pass the other end of thesafety wire through the ringpart of the safety wire.INITIALSETACTLINK POWER10BASE-T/100BASE-TX12V ININITIALSETACTLINK POWER10BASE-T/100BASE-TX12V ININITIALSETACTLINK POWER10BASE-T/100BASE-TX12V IN* Rear sheet