Panasonic WV-SP105 Installation Manual

Also see for i-Pro WV-SP102: Integration note Product catalog Comparison chart Specifications Datasheet

Contents

Panasonic WV-SP105 Installation Manual Manual pdf 17 page image

17If the screw of camera mount bracket is too long, adjust the screw length using a spacer so as tomeet the dimensions and conditions described in the illustration.Important:• When the camera mount bracket (locally pro-cured) is mounted on a wall, be sure toobserve the mounting height described onthe illustration.Camera mountingThe camera will be mounted on the camera mount bracket (locally procured). After the angular fieldof view is determined, the safety wire will be secured.Important:• The installation area shall be strong enough to hold the camera and camera mount bracket(locally procured).• The camera mount bracket (locally procured) shall be mounted on the foundation part of theconstruction or a part with adequate strength.• To prevent the mounting strength from becoming lower, do not use wooden screws to securethe camera mount bracket (locally procured).• The camera cannot be mounted on a camera housing or a pan/tilt head.z Secure the camera mount bracket (locally procured) to an installation position, and mount thecamera on the camera mount bracket. Prepare mounting screws according to the material ofthe area where the camera mount bracket (locally procured) is to be installed. The installationmethod may be different depending on the material of the area where the bracket is to beinstalled.When installing on steel: Fix with bolts and nuts (M6 or M8).When installing on concrete: Fix with anchor bolts (M6 or M8)The dimensions and conditions required for the screw of camera mount bracket is described as fol-lows:Floor290 cm {9.51'}or more4.5 mm{0.177"} ±0.23.5 mm{0.138"} or more1/4-20UNC