Category Indication DescriptionSD memory card Format Successfully formatted the SD memory card. Format error Error occurred when formatting the SD memory card. Write-protect ON(Locked card)A write-protected SD memory card is inserted. Detection error The SD memory card could not be correctly recognized. Write error An error occurred when writing to the SD memory card. Read error An error occurred when reading from the SD memory card. Delete error An error occurred when deleting data from the SD memorycard. File system error An error occurred in File system of the SD memory card. Undefined error An error other that the ones above has occurred for the SDmemory card.IMPORTANT• In order to be able to correctly use this function, format the SD memory card with the camera beforeusing it.• When using SD memory cards that have been used on other devices such as PCs, the correctinformation may not be able to be displayed.• Up to 30 SD memory card logs can be saved to the built-in memory of the camera. When the savedsystem logs have reached the maximum number, the newer logs will overwrite the older system logs.Note• Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for furtherinformation about the contents of the displayed statuses (relating to the “Viewnetcam.com” service,the UPnP function, or the self check).18.4 Reset the settings/Reboot the camera [Defaultreset]Click the [Default reset] tab of the “Maintenance” page. (®page 41, page 43)The settings and the HTML data of the camera can be initialized and reboot of the camera can be performedon this page.Operating Instructions 20118 Maintenance of the camera [Maintenance]
