• The maximum number of concurrent access user varies depending on the maximum image size andtransmission format.16.2.6 Configure the settings relating to DDNSTo access this camera via the Internet, it is necessary to configure the settings for the DDNS function.Refer to page 183 for how to configure the settings relating to DDNS.[Area]Select the region where the camera is installed. If the camera is used outside of Japan, select “Global”. If thecamera is used in Japan, select “Japan”.Japan/Global[Service]Select the DDNS service to determine whether or not to use DDNS.• Off: Does not use the DDNS function.• Viewnetcam.com: Uses the “Viewnetcam.com” service.• Dynamic DNS Update: Uses Dynamic DNS Update (RFC2136 compliant) without the DHCP cooperation.• Dynamic DNS Update(DHCP): Uses Dynamic DNS Update (RFC2136 compliant) with the DHCPcooperation.• Default: OffNote• When using Dynamic DNS Update (RFC2136 compliant), refer to the network administrator for whetheror not to cooperate with the DHCP.16.2.7 Configure the settings relating to SNMPThe settings relating to SNMP can be configured on this page. It is possible to check the status of the cameraby connecting to the SNMP manager. When using the SNMP function, contact the network administrator.Operating Instructions 16716 Configuring the network settings [Network]