QVGA /VGAWhen “16:9” is selected for “Aspect ratio”320x180/ 640x360• Default: VGA[Recording priority]Select “Constant bit rate” or “Frame rate” for the H.264 recording mode.• Constant bit rate: H.264 images will be recorded with the bit rate selected for “Max bit rate”.• Frame rate: H.264 images will be recorded with the frame rate selected for “Frame rate*”.• Default: Frame rate[Frame rate*]Select the frame rate for images to be recorded from the following.1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps* (E model)/ 15fps*/ 20fps*/ 30fps*• Default: 30fps*Note• When “Frame rate” is selected for “Recording priority”, this setting is available.• “Frame rate*” is restricted by “Max bit rate”. For this reason, the frame rate may be lower than thespecified value when any value marked with an asterisk (*) is selected.[Max bit rate]Select the bit rate for images to be recorded from the following.64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024kbps/ 1536kbps/ 2048kbps/ 3072kbps/4096kbps• Default: 1536kbps[Image quality]Select the quality for H.264 images to be recorded from the following.Low(Motion priority)/ Normal/ Fine(Image quality priority)• Default: NormalNote• When “Constant bit rate” is selected for “Recording priority”, this setting is available.[Refresh interval]Select an interval (I-frame interval; 0.2 - 1 second) to refresh the H.264 images to be recorded from thefollowing.0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s• Default: 1sSD memory card information[Remaining capacity]Total capacity and remaining capacity of the SD memory card will be displayed.Depending on the status of the SD memory card, the size indications will differ as follows.Indication Description--------KB/--------KB No SD memory card is inserted. Failed to obtain available capacitydue to error, etc.********KB/********KB The SD memory card is unformatted, or locked, etc.46 Operating Instructions10 Configure the basic settings of the camera [Basic]
