5 Transmit images onto an FTP serverImages can be transmitted to an FTP server. By configuring the following settings, transmission of imagescaptured at an alarm occurrence or captured at a designated interval to an FTP server will become available.IMPORTANT• When using this function, set the user name and the password to access the FTP server to restrictusers who can log into the FTP server.SW155SW152:To transmit images to the FTP server, select “Not use” for “SD memory card”, or set “Save trigger” to“FTP error” on the [SD memory card] tab of the “Basic” page when “JPEG” is selected for [Recordingformat]. (®page 42)5.1 Transmit an alarm image at an alarm occurrence(Alarm image transmission)An alarm image can be transmitted at an alarm occurrence to the FTP server. To transmit alarm images to anFTP server, it is necessary to configure the settings in advance.The settings for the FTP server can be configured on the [FTP] tab of the “Server” page. (®page 108)The alarm image transmission function can be turned on/off in the “Alarm image” section of the [Alarm] tab ofthe “Alarm” page. (®page 87)Note• Depending on the network traffic, the number of the transmitted images may not reach the set numberof images to be transmitted.SW155SW152:• Alarm images failed to be transmitted to the FTP server at an alarm occurrence will not be saved onthe SD memory card. However, images that fail to be transmitted with the FTP periodic imagetransmission will be saved.5.2 Transmit images at a designated interval orperiod (FTP periodic image transmission)Images can be transmitted at a designated interval or period. To transmit images at a designated interval orperiod, it is necessary to configure the settings in advance.The settings for the FTP server can be configured on the [FTP] tab of the “Server” page. (®page 108)It is possible to determine whether or not to use the FTP periodic image transmission function and to configurethe settings relating to alarm images and the schedule on the “FTP img. trans.” tab of the “Network” page.(®page 142)Note• Depending on the line speed or the traffic, images may not be transmitted at the designated interval.• When “On” is selected for both the alarm image transmission function and the FTP periodic imagetransmission function, the alarm image transmission function will be given priority over the FTP periodicimage transmission function. Therefore, images may not be transmitted at the interval designated onthe “FTP periodic image transmission” setting.20 Operating Instructions5 Transmit images onto an FTP server
