Panasonic WV-NS950 Setup Instructions

Also see for WVNS954 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Product catalog

Panasonic WV-NS950 Setup Instructions Manual pdf 20 page image

20Configure the settings relating to images and audio [Camerasetup]The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, presetpositions, audio, etc. can be configured on this page.The "Camera setup" page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position] tab andthe [Audio] tab.Configure the settings relating to JPEG/MPEG-4 images [JPEG/MPEG-4]Click the [JPEG/MPEG-4] tab on the "Camera setup" page. ( pages 4 and 5: How to display/operate the setupmenu) JPEG setupConfigure the settings such as "Refresh interval (JPEG)*", "Image capture size" and "Image quality" on this section.Refer to page 21 for further information about the settings relating to MPEG-4 images.[Refresh interval (JPEG)*]Select an interval to refresh the displayed JPEG imagefrom the following.0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/2 fps/3 fps/5 fps/6 fps */10 fps */15 fps */30 fps *Default: 5 fpsNote:When "ON" is selected for "MPEG-4 transmission",the refresh interval may be longer than the set valuewhen any value with an asterisk (*) on the right isselected.[Image capture size]Select "QVGA" or "VGA" for the image capture size ofJPEG images.Default: VGA[Image quality]Select image quality of JPEG images from the following.0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 LowDefault: 5 Normal