Panasonic WV-NP502E Installation Manual

Also see for WV-NP502: Product catalog Integration note Product catalog Comparison chart Operating instructions

Contents

Panasonic WV-NP502E Installation Manual Manual pdf 20 page image

20Camera mountingThe camera is mounted on the camera mount bracket (option) and the safety wire is secured.Important:• The installation area shall be strong enough to hold the camera and camera mount bracket(option).• The camera mount bracket (option) shall be mounted on the foundation part of the construc-tion or a part with adequate strength.• To prevent the mounting strength from becoming lower, do not use wooden screws to securethe camera mount bracket (option).z Secure the camera mount bracket (option) to an installation position, and mount the camera onthe camera mount bracket.Prepare mounting screws according to the material of the area where the camera mount brack-et (option) is to be installed. The installation method may be different depending on the materialof the area where the bracket is to be installed.• When installing on steel: Fix with bolts and nuts (M6 or M8)• When installing on concrete: Fix with anchor bolts (M6 or M8)The mounting conditions of the camera mount bracket are described as follows:Important:• When the camera mount bracket is mount-ed on a wall, be sure to observe themounting height described on the illustra-tion.InstallationpositionOn ceilingApplicablemount bracketWV-7010ARecommendedscrewM6 or M8Screwquantity3 piecesMinimum pull-outstrength (per 1 pc.)196 NOn wall WV-831 M8 4 pieces 921 NFloor2 m 70 cmor more