Panasonic WV-NF302 Installation Manual

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Installation Manual Manual pdf 23 page image

23• When using PoE (Power over Ethernet: IEEE802.3af compliant)Connect a LAN cable (category 5 or higher) between a PoE device (such as a PoE hub) andthe network connector of the camera.Important:• Use all of 4 pairs (8 pins) of the LAN cable.• The maximum cable length is 100 m.• Make sure that the PoE device in use is compliant with IEEE802.3af standard.• When connecting both the 12 V DC power supply and the PoE device for power supply,PoE will be used for power supply.• When disconnecting the LAN cable once, connect the cable again after 2 seconds or morefrom the disconnection. When the cable is connected before 2 seconds passed, the powermay not be supplied from the PoE device.• Refer to the provided slip (Recommended network devices for PoE (IEEE802.3af compli-ant) connection with the WV-NF302) for applicable PoE devices.Step 3Connect a LAN cable (category 5 or better)to the network connector on the mountingside of the camera.Step 4Connect the audio cable (accessory) to theaudio input/output terminal on the bottomside.Step 5Connect an external device.q Remove 9 mm – 10 mm {11/32" – 3/8"} ofthe outer jacket of the cable from theexternal device and twist the core of thepower cord to prevent a short circuit.Specification of cable (wire):AWG #22 - #28 Single core, twistedw Insert the cable into the hole to the endwhile the corresponding button on theI/O terminals plug is held down, andrelease the cable. Make sure that thecable is securely engaged by pulling thecable after cable insertion. Repeat thecable insertion above for all cables.GNDAUXALARM OUTALARM IN10BASE-T/100BASE-TXACT LINKMIC IN12VAUDIO OUTINITIALSETNetwork connectorAudio input/output terminalTo powered speakerAudio output cable (red)To plug-in powertype microphoneMicrophone input cable(white)Approx. 9 mm - 10 mm {11/32" - 3/8"}qwExternal I/O terminals