44Images recorded on the SD memory card on the camera can be obtained as follows.Refer to the setup instructions (PDF) for further information about the SD memory card recording and for how to setthe recording rate for the SD memory card recording.Screenshot 1When the SD memory card on the connected cameracontains recorded images, the SD memory data obtainbutton (SD in red) will be displayed in the [REC] box.Step 1Click the SD memory data obtain button.Important:• The SD memory data obtain button can be clickedby only users for whom the "SD MEMORY REC"checkbox is checked on the "User Level" page("User Mng." – "User Level" – "SD MEMORY REC").• SD memory data cannot be obtained when theemergency recording is being performed.• When the recording rate for "SD MEMORY REC" isnot set, the SD memory obtain button will not be dis-played.Notes:• The letters "SD" on the SD memory data obtain but-ton will be displayed in blue when there is no record-ed image on the SD memory card.• When the SD memory data obtain button is clickedwhile the letters "SD" are displayed in blue, the unitwill check if there is any recorded image on the SDmemory card or not. When a recorded image isfound, the letters "SD" on the SD memory dataobtain button will turn red.Screenshot 2The confirmation window will be displayed. Step 2Click the [OK] button.Important:When obtaining the SD memory data starts, allusers will forcibly be logged out and all recordingscurrently being performed will stop.Obtain Images on an SD memory card