21Playback on a multi-screenText( page 38)• Displays playback images on a 4-Screen.• Up to 4 camera images can be displayed simultaneously on a4-Screen.Each time this button is clicked, images consisted from 4 cam-era channels (4A - 4D) set in advance (monitor display set-ting) will be switched and displayed sequentially on a 4-Screen.Refer to the setup instructions (PDF) for descriptions of howto perform the monitor display setting.• Click a camera title in the [Camera Select] box or the cameratitle displayed on the image to return to a single screen dis-play.Notes:• When displaying images on a multi-screen, it may cause out-of-sync between each channel. In this case, click the [PLAY]button after clicking the [PAUSE] button to correct the syn-chronization between each channel.• When frame play is performed while displaying images on amulti-screen, displayed paused images of each channel maynot simultaneously go to the next/previous frame.• The attached text information will be displayed when this but-ton is clicked during pausing.Click the [TEXT] button after pausing playback.• The text information display/edit is available only when arecorded image is played on a single screen.Skips to the latestrecorded image• Skips to the latest time of the image currently playing andplays it. Skips to the point 30 seconds before the time of thelatest recorded image with the default setting.The following points are available to be skipped to.5 s/10 s/30 s/1 min/5 minRefer to a system administrator for further information.• When the [GO TO LAST] button is clicked while displaying liveimages, playback of the latest recorded images from theselected camera channel will start.Note:When the [GO TO LAST] button is clicked while recordingimages at a lower recording rate, playback of the latestrecorded images may be paused or images may not be dis-played.