Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 50 page image

506. Repeat from step 1 to search for another time and dateor press the [TIME & DATE SEARCH] button to cancelthe function. Pressing the [STOP] button will also endthe searching.Note: Searching may take the recorder 18 seconds atworst■ Multi-screen PlaybackYou can view a multiple playback image displayed in 4-splitor 9-split pattern on the monitor at a time.• Normal PlaybackPress the [PLAY] button to start normal playback. Theimage data recorded on the disk are sequentiallyplayed back, and the monitor displays images in thesingle display mode or multi-screen display mode.• Multi-screen PlaybackPress the [MULTI SCREEN SELECT] button appropriatetimes. The monitor display changes as follows. TheLED’s in the [MULTI SCREEN SELECT] button andrespective input buttons will light up.Single Image → Quad A (4A/comprising input 1, 2, 3,and 4) → Quad B (4B/ input 5, 6, 7, and 8) → Nine-spit(input 1 – 8) → Quad A → Quad B → Nine-split• Specific Input PlaybackPress the respective input button. The images of theselected input is continuously played back and dis-played on the monitor.• STOP PlaybackPress the [STOP] button to stop playback.Note: when the playback proceeds to where recordingis executed on the disk, the recorder will pauseplayback and freeze the displayed image on themonitor.4. Press the [PLAY] button to play back the searchedrecord.5. Press the [STOP] button to stop playback.Note: “Alarm Search Playback” and “Alarm Log Recall”are similar, but different in operations. Refer to ■Alarm Log Recall & Search on page 46.■ Time & Date Search PlaybackA picture record of a specified time and date is playedback.1. Press the [TIME & DATE SEARCH] button. The LED inthe button lights up. The monitor displays the time &date search window.2. Press the [D] or [C] button to move the cursor to thenext position.3. Rotate the JogDial clockwise to increase the parameteror counter-clockwise to decrease it.4. Repeat the steps 2 and 3 above until the desired para-meters are selected.5. Press the [PLAY] button to start playback. The monitordisplays the single spot image when an input is select-ed or nine-split image when all input is specified. Therecorder stops searching when the playback reaches tothe end of the record.HDDFULLERRORMULTI SCREENSELECTZOOMALARMSERCHSTOPPLAY MODE SELECTSETUP/ESCPLAY RECJAN31.03 23:00:00TO SEARCH PUSH PLAY KEY51 3PLAYTIME&DATESEARCHREC STOPALARMRECALLRECPUSH— PAUSE SET2