Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 40 page image

404. Repeat step 1, 2, and 3 until all steps are programmed,or press the [SETUP/ESC] button to return to theSEQUENCE SETUP menu.5. Move the cursor to SEQUENCE TIMING in the SEQSETUP menu.Select INT or EXT with the JogDial, and press theJogDial.The default is INT.INT: Forwards the step when the assigned time elaps-es.EXT: Forwards the step when the SEQ IN signal is inputto the rear panel.6. Move the cursor to AUTO SKIP with the [D] or [C] but-ton.Select ON or OFF with the JogDial, and press theJogDial.The default is ON.ON: The sequence skips the step where no video isinput.OFF: The step will be displayed as a blackout screen.● Spot Sequence Setup SPOT SEQSETUPOpen the SPOT SEQ SETUP menu to program thesequence steps for displaying single input images.1. Move the cursor to the desired step using the [D] or[C] button.2. Select a camera number with the JogDial, and pressthe JogDial.The default camera number is identical to the step num-ber.Available camera: From 1 to 8.Note: The recorder will skip the step you assigned “–”.3. Select duration for the step with the JogDial, and pressthe JogDial.Available duration: 2-30 S4. Repeat step 1, 2, and 3 until all steps are programmed,or press the [SETUP/ESC] button to return to theSEQUENCE SETUP menu.5. Procedures for SEQUENCE TIMING are the same asstep 5 in MULTI SEQ SETUP.6. Procedures for AUTO SKIP are the same as step 6 inMULTI SEQ SETUP.● Camera View Setup CAMERA VIEWSETUPOpen the CAMERA VIEW SETUP menu to program the liveimage of each camera channel to display or veil on themonitor.1. Move the cursor to the desired camera using the [D] or[C] button.2. Select ON or OFF with the JogDial, and press theJogDial.The default is ON.ON: Live image of the channel is displayed.OFF: Blackout image is displayed.3. Repeat step 1 and 2 until all channels are programmed,or press the [SETUP/ESC] button to return to theSWITCHER SETUP menu,Notes:• Recording will be carried out regardless of this set-ting.• The recorded images of the channel will be playedback and displayed on the monitor even if OFF isselected. → → → → → → → →