Panasonic Viera U50A series Operating Instructions Manual

Contents

Panasonic Viera U50A series Operating Instructions Manual Manual pdf 56 page image

Using Network Services (DLNA)563 Select the connection type and setPlease select network connection type.ManualConnection TypeSearch for access pointWPS(PIN)WPS(Push button)selectconfirm■ [WPS(Push button)]“Auto Tuning” (p. 17)■ [WPS(PIN)]Enter the PIN code to the access point, and then select [Connect]1) Please press the ‘WPS’ button on the accesspoint until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the access point.Please register the following PIN codes on thewireless access point.PIN code : 12345678Select ‘Connect’ after entering and saving thesettings on the access point.WPS(PIN)Connect■ [Search for access point]“Auto Tuning” (p. 17)■ [Manual]You can setup SSID, authentication type, encryption type, and encryption key manually.Follow the on-screen instructions and set manually.4 Select [Connection Test] and access to testNetwork SetupConnection Test Accessselectaccess● Performs automatic testing of the network connection for the TV. (It takes awhile to test.)Check access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Connection Test : succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections. And then try again.Update TV’s software /Accesses the specific website to update TV’s software and search if any software updates are available.Select [Software Update]Network TypeConnection TestAccess Point SettingsIP/DNS SettingsNetwork SetupWirelessMAC AddressAccess12-34-56-78-9a-bcSoftware Updateselectaccess● Follow the on-screen instructions.NoteNetwork TypeConnection TestAccess Point SettingsIP/DNS SettingsMAC AddressNetwork SetupWireless12-34-56-78-9a-bc[MAC Address]● MAC address is a unique address that identifies hardware in the network.(for information only)