Panasonic Viera U50A series Operating Instructions Manual

Contents

Panasonic Viera U50A series Operating Instructions Manual Manual pdf 44 page image

Displaying PC Screen on TV44Displaying PC Screen on TVThe screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected.● To connect PC (p. 69, 71)1 Select the external input and select [PC]AV Input SelectionPCAV2AV1SD Card/USBTVHDMI2HDMI1selectaccess● Corresponding signals (p. 79)● If [H-freq.] or [V-freq.] is shown in red, the signals may not besupported.PC menu setting● To make settings “How to Use Menu Functions” (p. 30)Menu Item Adjustments / Configurations (alternatives)PictureAdvanced SettingsWhite BalanceR-Gain, G-Gain, B-Gain Adjusts the white balance of bright red / green / blue areaR-Cutoff, G-Cutoff,B-Cutoff Adjusts the white balance of dark red / green / blue areaReset White Balance Press the OK button to reset to the default White BalanceGammaGamma Switches the gamma curve [S Curve] / [1.8] / [2.0] / [2.2] / [2.4] / [2.6]● Please note the numerical values are reference for the adjustment.Reset Gamma Press the OK button to reset to the default GammaSetupPC SetupInput ResolutionSwitches to a wide view:VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA(1,024 × 768 pixels) / WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)● Options change depending on signalsClock Set to the minimum level if noise occursH-posAdjusts horizontal positionV-posAdjusts vertical positionClock PhaseEliminates flicker and distortion● Adjust after Clock adjustment● Set to the minimum level if noise occursSyncPC sync signal type [H & V] / [SOG][H & V]: by the horizontal and vertical signals from your PC[SOG]: Sync on Green sync from your PCReset PC Settings Press the OK button to reset [PC Setup] to the default settingsDVI PositionSettingsH-pos Adjusts horizontal position settings of DVIV-pos Adjusts vertical position settings of DVIReset DVI PositionSettingsPress the OK button to reset [DVI Position Settings] to the defaultsettings● Other items (p. 31 - 36)Note● For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable (p. 77).