Panasonic Viera U50A series Operating Instructions Manual

Contents

Panasonic Viera U50A series Operating Instructions Manual Manual pdf 40 page image

Tuning and Editing Channels40Update Digital TV channel automatically [Update Channel List] (Digital TV)You can add new channels, delete removed channels, update channel name and position automatically to the channellist.CH 6 69RF Ch Channel Name Type QualityDigital TV Update Channel ListScanThis will take about 3 minutes.● The channel list is updated while keeping your settings in [Favourites Edit],[Channel List], [Child Lock], etc.● Depending on the signal condition, the update may not work properly.Display a notification message [New Channel Message] (Digital TV)Selects whether to give a notification message when a new Digital TV channel is found.New channels found!Press OK to update channel list.Press EXIT to ignore.● Selecting OK will perform [Update Channel List].● Sometimes, mainly during summer months at night, the TV may pickupdistant TV stations outside your broadcast due to favourable short termionosphere conditions. In such circumstances when you press OK button,the TV does not add any new channels. This is normal.Check Digital TV signal [Signal Condition] (Digital TV)Selects a channel and checks the Digital TV signal condition.A good Signal Strength is not an indication of suitable signal for Digital TV reception.Use the Signal Quality indicator as follows.● Green bar: Good● Yellow bar: Poor● Red bar: Bad (Check the aerial)● To change the channelCHExample:101 DZFinfokanal0 2 4 6 8 10Wenvoe[CH32] 562.00 MHzChannel NameSignal QualitySignal StrengthNetwork NameRF ParameterDigital TV Signal ConditionThese bars show the maximum signal value of the selectedchannel.Auto Tuning using the buttons on the TVFor Auto Tuning, using the buttons on the TV (p. 10)1 Press the F button repeatedly until [Auto Tuning] appears● To return to TV● Control panel OSD appearswhen pressing the controlpanel button.2 Access [Auto Tuning]3 Start [Auto Tuning]