Panasonic Viera U50A series Operating Instructions Manual

Contents

Panasonic Viera U50A series Operating Instructions Manual Manual pdf 18 page image

Auto Tuning186 4. Select [Yes]NoAccess Point SettingsEncryption key is set to:-XXXXXXXXYesSelect ‘Yes’ to confirm.Select ‘No’ to change.selectset● To re-enter the encryption key, select [No].5. After the access point setting is finished, perform the connection testCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Connection Test : succeededThe test is successful and the TV is connected tothe network.: failed6. Go to the next step Check the settings and connections. And then tryagain.● To set manually, select [Manual] and set eachitem.For details (p. 55)(Press twice)7 Select [Home]Select [Home] viewing environment to use in your home environment.Please select your viewing environment.Home Shop selectset■ [Shop] viewing environment (for shop display only)[Shop] viewing environment is the demonstration mode to explain main features of this TV.Select [Home] viewing environment to use in your home environment.● You can return to viewing environment selection screen at the stage of Shop confirmation screen andAutomatic Demo Off / On selection screen.1 Return to viewing environment selectionscreen2 Select [Home]Please select your viewing environment.Home Shop selectsetShopYou have selected shop mode RETURNAutomatic DemoOff OnTo change viewing environment later on, you will need to initialise all settings by accessing ShippingCondition. [Shipping Condition] (p. 42)Auto Tuning is now complete and your TV is ready for viewing.If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.Note● To check the channel list “Using TV Guide” (p. 23) or “Using the Freeview Guide (Digital TV)” (p. 25)● To edit or hide (skip) channels “Tuning and Editing Channels” (p. 37 - 40)● To retune all channels [Auto Tuning] in “Tuning and Editing Channels” (p. 39, 40)● To add the available TV mode later [Add TV Signal] (p. 35)● To initialise all settings [Shipping Condition] (p. 42)If you connect the Wireless LAN Adaptor later on, the confirmation screenwill be displayed for the setup. Wireless LAN adaptor connected, do you want toset it up?No - ExitCurrent network type : WirelessWireless LAN adaptor connectionYes No● To setup the wireless connection (p. 55)