Panasonic Viera U50A series Operating Instructions Manual

Contents

Panasonic Viera U50A series Operating Instructions Manual Manual pdf 17 page image

Auto Tuning176 Select the connection typePlease select network connection type.Connection TypeSearch for access pointWPS(Push button)selectaccess● If your access point supports WPS (Pushbutton), then select this option. If not,select [Search for access point].[WPS(Push button)]1. Press the WPS button on the access point until the light flashes2. Connect the Wireless LAN Adaptor and the access point1) Please press the ‘WPS’ button on the accesspoint until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the access point.1) Please press the ‘WPS’ button on the accesspoint until its light flashes.2) When the light is flashing select ‘Connect’ on TV.If you are unsure, please check the instructionmanual of the access point.WPS(Push button)Connect● Ensure that your access point supports WPS for this setup.● WPS: Wi-Fi Protected Setup™● If the connection has failed, check the settings and positions ofyour access point. And then, follow the on-screen instructions.3. After the access point setting is finished, perform the connection testCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Connection Test : succeededThe test is successful and the TV is connected tothe network.: failedCheck the settings and connections. And then tryagain.4. Go to the next step(Press twice)[Search for access point]Access points found automatically are listed.1. Select your desired access point123Access Point AAccess Point BAccess Point C11n(2.4GHz)11n(5GHz)11n(5GHz)Available Access Points EncryptNo. SSID ReceptionWireless typeselectaccess● To search access pointsagainY: Encrypted access point ● For the information of thehighlighted access pointINFO2. Access the encryption key input modeEncryption Key SettingConnection will be made with the following settings:-SSID : Access Point AEncryption keyAuthentication type : WPA-PSKEncryption type : TKIPPlease input the encryption key.● If the selected access point is not encrypted, the confirmationscreen will be displayed. It is recommended to select theencrypted access point.3. Enter the encryption key of the access pointA B C D E F G H I J K L M N O P Q R S TU V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #a b c d e f g h i j k l m n o p q r s tu v w x y z ( ) + - . * _Access Point SettingsEncryption keySet characters StoreselectsetRETURN● You can set characters by using numeric buttons. (p. 78)