Panasonic Viera TX-P42UT50E Operating Instructions Manual

Also see for TX-P42UT50Y: Operating instructions

Contents

Panasonic Viera TX-P42UT50E Operating Instructions Manual Manual pdf 74 page image

Using Network Services (DLNA / VIERA Connect)744 Select [Connection Test] and access to testConnection Test AccessselectaccessPerforms automatic testing of the network connection for the TV. (It takes awhile to test.)Check network cable connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test : succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections. And then try again.Wireless connection settingsThis setting is for the wireless network connection.Confirm the encryption key, settings and positions of your access point before starting setup. For details, read themanual of the access point.1 Select [Network Connection] and set to [Wireless]Connection TestNetwork ConnectionWireless Network SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateWirelessNew Software MessageNetwork StatusOnselectaccess / store2 Select [Wireless Network Settings]Connection TestNetwork ConnectionWireless Network SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateWirelessNew Software MessageNetwork StatusOnAccessselectaccessWhen the access point is already set, [Current Settings] screen will bedisplayed.To change the settings, select [No] on this screen and go to the next step.3 Select your desired access point123Access Point AAccess Point BAccess Point C11n(2.4GHz)11n(5GHz)11n(5GHz)Available Wireless NetworksNo. Network Name(SSID) StatusWireless typeselectaccessFor [WPS(Push button)] (p. 18)(red)For [WPS(PIN)] (p. 75)(green): Encrypted access pointTo search access points again(blue)For the information of thehighlighted access pointTo set manually (p. 75)(yellow)4 Access the encryption key input modeEncryption Key SettingSecurity type : WPA-PSKEncryption type : TKIPPlease input the encryption key.Encryption keyConnection will be made with the following settings:-Network Name(SSID) : Access Point AIf the selected access point is not encrypted, the confirmation screen will bedisplayed. It is recommended to select the encrypted access point.