Panasonic Viera TX-P42UT50E Operating Instructions Manual

Also see for TX-P42UT50Y: Operating instructions

Contents

Panasonic Viera TX-P42UT50E Operating Instructions Manual Manual pdf 23 page image

Watching TV23AspectChange the aspect ratio (image size)Enjoy viewing the image at its optimum size and aspect.Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose theaspect ratio automatically according to the “Aspect Control Signal” (p. 90). To change the aspect ratio manually1 Display Aspect Selection listAspect SelectionAuto16:914:9Just4:34:3 FullZoom1Zoom2Zoom3SelectEXITRETURNChangeAspect Selection list2 While the list is displayed,select the modeselectstoreYou can also change the mode onlyusing the ASPECT button.(Press repeatedly until youreach the desired mode.)[Auto]The best ratio is chosen and the image expanded to fill the screen.For details (p. 90)[16:9] [4:3 Full]Directly displays the image at 16:9without distortion (anamorphic).Displays a 4:3 image enlargedhorizontally to fit the screen.[14:9] [Zoom1]Displays the image at the standard14:9 without distortion.Displays a 16:9 letterbox or 4:3 imagewithout distortion.[Just] [Zoom2]Displays a 4:3 image full-screen.Stretching is only noticeable at the leftand right edges.Displays a 16:9 letterbox (anamorphic)image full-screen without distortion.[4:3] [Zoom3]Displays the image at the standard 4:3without distortion.Displays a 2.35:1 letterbox (anamorphic)image full-screen without distortion.At 16:9, displays the image at itsmaximum (with slight enlargement).NoteAspect cannot be changed in teletext service and 3D mode.Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals.Last viewSwitch to previously viewed channel or input mode easilyPress again to return to the current view.NoteSwitching channel is not available while the recording of Timer Programming or Direct TV Recording is in progress.Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.