Panasonic Viera TX-P42UT50E Operating Instructions Manual

Also see for TX-P42UT50Y: Operating instructions

Contents

Panasonic Viera TX-P42UT50E Operating Instructions Manual Manual pdf 16 page image

Auto SetupQuick Start Guide165 1 [DVB-C Network Settings]Depending on the country you select, select your cable provider beforehand by following the on-screeninstructions.Frequency AutoNetwork IDStart Auto SetupAutoDVB-C Network Settings select [Start Auto Setup]accessNormally set [Frequency] and [Network ID] to [Auto].If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable providerwith numeric buttons.2 [DVB-C Auto Setup] 3 [DVB-T Auto Setup]0% 100%123100100CBBC ChannelBBC Radio WalesE4100SearchingDVB-C Auto SetupProgressThis will take about 3 minutes.No. Channel Name TypeFree TVFree TVFree TVQualityFree TV: 3 Pay TV: 0 Radio: 0CH 5 69626262100100CBBC ChannelBBC Radio WalesE410062 100Cartoon NwkSearchingCH Channel Name TypeFree TVFree TVFree TVFree TVQualityFree TV: 4 Pay TV: 0 Radio: 0DVB-T Auto SetupProgressThis will take about 3 minutes.Depending on the country you select, the channel selection screenwill be displayed after DVB-T Auto Setup if multiple channels havethe same logical channel number. Select your preferred channel orexit the screen for automatic selections.4 [Analogue Auto Setup] 5 Preset DownloadIf Q-Link, VIERA Link or similar technology (p. 82, 83) compatiblerecorder is connected, channel, language and country / regionsettings are automatically downloaded to the recorder.0% 100%Sending Preset DataPlease wait!Remote control unavailableIf downloading has failed, you can download later through theSetup Menu. [Download] (p. 43)CH 29CH 33 BBC1CH 2 78 41CC 1SearchingCH Channel NameAnalogue: 2Analogue Auto SetupScanThis will take about 3 minutes.6 Setup the network connectionSetup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 19, 70).To setup the wireless connection, the Wireless Adaptor (optional accessory) is required. Please note that thisTV does not support wireless public access points.Ensure the network connections (p. 14) and network environment are completed before starting setup.Select the network typeNetwork SetupSelect Wired or WirelessWired Wireless Set later[Wired] “Wired connection” (p. 14)[Wireless] “Wireless connection” (p. 14)selectaccessTo setup later on or skip this stepSelect [Set later] or [Wired]1. Select [Auto]Check network cable connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test : succeededThe test is successfuland the TV isconnected to thenetwork.: failedCheck the settings andconnections. And thenselect [Retry].Acquire IP AddressAuto Manualselectaccess Automatically setup is done and the test of thenetwork connection starts.To set manually, select [Manual] and set each item.For details (p. 73)2. Go to the next step(Press twice)