Panasonic Viera TX-P42UT50E Operating Instructions Manual

Also see for TX-P42UT50Y: Operating instructions

Contents

Panasonic Viera TX-P42UT50E Operating Instructions Manual Manual pdf 46 page image

Retuning from Setup Menu46Retuning from Setup MenuAutomatically retune the channels received in the area.This function is available if channel tuning is already performed.Only the selected mode is retuned. All the previous tuning settings are erased.If Child Lock PIN number (p. 55) has been set, the PIN number is required.If tuning has not been done completely [Manual Tuning] (p. 50)DVB-C, DVB-T, Analogue channels1 Select DVB-C, DVB-T or Analogue(p. 20)2 Display the menu and select [Setup]Setupselectaccess3 Select [DVB-C Tuning Menu], [DVB-T Tuning Menu] or [AnalogueTuning Menu]DVB-C Tuning Menu AccessDVB-T Tuning Menu AccessAnalogue Tuning Menu Accessselectaccess4 Select [Auto Setup]Auto Setup Accessselectaccess5 Set the Auto Setup settings (DVB-C)Search Mode Free ChannelsScan ModeFrequencySymbol RateNetwork IDDVB-C Auto Setup SettingsQuickAutoAutoAutoStart scanselectaccess / storeAfter settings, select [Start scan].[Scan Mode][Full]: Scans the whole frequency range.[Quick]: Scans the suitable frequency in your country.Normally set [Frequency], [Symbol Rate] and [Network ID] to [Auto].If [Auto] is not displayed or if necessary, enter the value specified by your cable provider with numeric buttons.6 Start Auto Setup (Settings are made automatically)DVB-C:DVB-C Auto SetupAll DVB-C tuning data will be erased0% 100%123100100CBBC ChannelBBC Radio WalesE4100SearchingDVB-C Auto SetupProgressThis will take about 3 minutes.No. Channel Name TypeFree TVFree TVFree TVQualityFree TV: 3 Pay TV: 0 Radio: 0