Using Common Interface50Using Common InterfaceThe Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.This TV works only for Pay TV modules complying with CI standard. This function is not available for BskyB’s Sky channels. Video and audio signals may not be output depending on broadcasts or services.Caution Turn Off Mains power On / Off switch wheneverinserting or removing the CI module. If a viewing card and a card reader come as a set, firstinsert the card reader, then insert the viewing card intothe card reader. Insert the module in the correct direction.Rear of the TVInsert or remove straightlyand completelyCI slotCI moduleInsert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. Follow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels donot appear, perform the below to verify the card is recognised by the TV. For more details, see the manual of the CI module, or check with the broadcaster.1 Select DVB(p. 16)TV2 Display the menu and select [Setup]Main MenuPictureSoundSetupselectaccess3 Select [System Menu]System Menu AccessSetup Menu selectaccess4 Select [Common Interface]System MenuShipping ConditionSystem UpdateSoftware LicenceSystem InformationCommon InterfaceOwner IDAccess accessselect5 Access Common Interface and follow the on-screen instructionsCommon InterfaceSlot 1: Module inserted On-screen instructions may not correspond to the remote control buttons.