Viewing Teletext23Viewing TeletextYou can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) The availability of teletext services for a programme is indicated by [TEXT] in the information banner.19:30 - 20:00Coronation Street1 BBC ONE WalesNowTEXTSelect favouritesFor info pressAll DVB Channels19:50Displayed if programme has teletext serviceInformation banner (p. 17)Depending on the broadcaster, the digital teletext (MHEG) services may not be available. In this case, the operation ofthe teletext services may be the same as the analogue teletext services (p. 24).Digital teletext (MHEG)Digital teletext services differ greatly from analogue teletext.When you switch to a digital teletext service, the images you see can contain graphics and text, laid out and controlledin a manner decided by the broadcaster. To return to TVTEXT1 Select DVBTV DVB programmes have digital teletextservices (MHEG).2 Switch to TeletextTEXT17:51 28 FebExample : How to operate servicesIn all cases, it is possible to navigate the pages using buttons on the remote control, butbecause the commands available must apply to all manufacturers of digital equipment,some on screen commands may not correspond exactly to the remote control buttons. Select, go Symbol : Back key Coloured charactersColoured button When options with numbers aredisplayedjklghi mnotuvpqrs wxyzabc defNote As soon as you switch to a digital channel with links to a teletext service, software is downloaded in the backgroundto enable the teletext function. This means that when switching to a digital channel, you should wait for approximately5 seconds before pressing the TEXT button - this will allow the software to download. If you press the TEXT buttonbefore download is complete, it will be ignored and you will have to press the TEXT button again when the downloadis complete. While navigating digital teletext, you will find there is a short delay when moving between pages while the pagedownloads. There is often a prompt shown somewhere on the page (for example “Loading”) to let you know that thisis happening.