Panasonic Viera TX-26LXD600 Operating Instructions Manual

Also see for Viera TX-26LXD600: Quick start guide Service manual

Panasonic Viera TX-26LXD600 Operating Instructions Manual Manual pdf 9 page image

16 17ViewingTerminal AV1 AV2 AV3 AV4 Component PC HDMI1 HDMI2Manual inputselection AV1 AV2AV2S(S-video input)AV3AV3S(S-video input)AV4AV4S(S-video input) Component PC HDMI1 HDMI2Auto inputselectionEC1/RGBAV1/RGB(RGB input) EC2 EC3/RGBAV3/RGB(RGB input) ― ― ― EC/HDMI1 HDMI2HDMI1/2greenred yellow green yellowblueredblueWatching VCR, DVD and Satellites23Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.Connect the Satellite receiver and you can watch satellite broadcasts.To connect the equipment (p. 8 and p. 9)The Remote Control is capable of operating some functions of selected Panasonic external equipment.Select the connectorconnected to the equipmentAV1 AV2/S-videoAV3/S-videoAV4/S-videoComponent/PC(AV mode screen)Note• If the external equipment has an aspect adjustment function, set to "16:9".• For details, see the manual of the equipment or ask your local dealer.• HDMI (p. 43)■ To return to TV• example: AV1 red PC blue yellow (twice)Select the external inputHDMI1/HDMI2Displays the selected connector1 Turn the TV on■ When connecting with SCART as example 2 or 3 (p. 8 and p. 9)Receives input signals automatically when playback starts orsatellite receiver is switched on• Input signals are automatically identified by the SCART (pin 8) terminal.• This function will be available for HDMI connection too (p. 43).■ If input mode is not switched automaticallyPerform and• When colour bar disappears Press any coloured buttons• You can also select the connector using the TV/AV button on the front panel of the TV.Press the button repeatedly until you reach the connector to view.• Dependant on DVD/VCR setupScreen display• Watching VCR, DVD and SatellitesVCR / DVD switch∗Select VCR to operate Panasonic VCR or DVD equipmentSelect DVD to operate Panasonic DVD equipment or Player theatreStandbySet to Standby mode / Turn onPlayPlayback videocassette / DVDStopStop the operationsRewind / Skip / SearchVCR: Rewind, view the picture rapidly in reverseDVD: Skip to the previous track or titlePress and hold to search backwardFast-forward / Skip / SearchVCR: Fast-forward, view the picture rapidly forwardDVD: Skip to the next track or titlePress and hold to search forwardPausePause / RestartDVD: Press and hold to play at slow speedProgramme Up / DownSelect programmeRecordStart recordingPanasonic equipment connected to the TV can be directly operated with the remote control.Note• After setting, execute operation confirmation.• The respective VCR / DVD code is turned to the default when battery has been exchanged. Set it again.• Depending on the model, operation may not be possible.∗The remote control will be available for various Panasonic equipment with the following settings.Switch to select VCR or DVD you want to changePress and hold whileoperatingEnter the code below(two digit code) PressVCREquipment CodeVCR 10 (default)DVD 11DVDEquipment CodeDVD 70 (default)Player theatre 71