34Advanced35Main menuPicture menuSound menuSetup menuQ-LinkControl with HDMIOff timerTuning MenuOwner IDShipping conditionSetup menu AV2OnAV2 out MonitorOffPower on preference TVAccessTeletext FASTEXT0123456789You now have the opportunityto enter your details andhelp the police crack crimesee instruction bookPIN NUMBER :NAME :POSTCODE :Owner IDHOUSE NO : ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗∗ ∗ ∗ ∗STR F TV/AVNAME : APOSTCODE :Owner IDHOUSE NO :Q-LinkControl with HDMIOff timerTuning MenuOwner IDShipping conditionSetup menuAV2OnAV2 out MonitorOffPower on preference TVAccessTeletext FASTEXTMain menuPicture menuSound menuSetup menuAll tuning data will be erasedShipping conditionExitReturnStart324Select "Setup menu"Select "Shipping condition"Display the menuHow to set■ To return to TVRestore SettingsCheck the message and initialiseFollow the on-screen instructions• "Auto Setup" will automatically start when MAINS power On / Off switch is nextturned On. (p. 10)■ To re-tune TV channels only, e.g. after moving house• DVB: "DVB Auto Setup" (p. 30)• Analogue: "Auto setup" (p. 33)ShippingconditionRestoreSettingssetResets the TV to its original condition, i.e. no channels tuned in.All settings other than "Owner ID" (channels, picture, sound quality, etc.) are reset.Enter the 4-digit PIN number of your choice• Make a note of the PIN number in case you forget it.Enter your name, address, and post code, in that orderStoreOwner IDInputowner IDOwner IDTo change the stored informationCharacters Entry fieldSelectthe entry field To check the "personal information" storedHold down forabout 6 sec.Displays the informationon the screen(for several sec.)• The PIN number isnot displayed.Enter thePIN number-• Owner ID• Restore SettingsSelectcharacterTo nextcharacterstore34Select "Owner ID"How to set■ To return to TVEntry of the security code (PIN number) and "personal information" (your name, address and post code).In the unfortunate event of theft it will help the Police to determine the owner.If you have skipped the Owner ID input in "Auto Setup" (p. 10), and input it later, start from .If you input the Owner ID in "Auto Setup" (p. 10), perform .(Press twice)accessselectaccessselectSelect "Setup menu"Display the menuaccessselect121accessselect