Panasonic Viera TX-26LX600F Operating Instructions Manual

Also see for Viera TX-26LX600F: Service manual Service manual

Contents

Panasonic Viera TX-26LX600F Operating Instructions Manual Manual pdf 7 page image

12 13ViewingVCR / DVD switch∗Select VCR to operate Panasonic VCR or DVD equipmentSelect DVD to operate Panasonic DVD equipment or Player theatreStandbySet to Standby mode / Turn onPlayPlayback VCR / DVDStopStop the operationsRewind / Skip / SearchVCR: Rewind, review (during playback)DVD: Skip to the previous track or titlePress and hold to search backwardFast-forward / Skip / SearchVCR: Fast-forward, cue (during playback)DVD: Skip to the next track or titlePress and hold to search forwardPausePause / RestartDVD: Press and hold for slow-motion playProgramme Up / DownSelect programmeRecordStart recordingHDMI1/2blueredgreenred yellow green yellow blue• Watching Videos and DVDsWatching Videos and DVDs12It is possible to connect a variety of external equipment to the TV. Once the equipment is connected, usethe following procedure to view the input.To connect the equipment (p. 30)Select the connectorconnected to the equipment(AV mode screen)Note• Automatic Input selection - Input mode is automatically switched from TV to AVmode when the equipment connected via SCART or HDMI terminal is operated.When the equipment is turned off, the TV is set to TV mode.• If the external equipment has an aspect adjustment function, set to "16:9".• For details, see the manual of the equipment or ask your local dealer.■ To return to TV• example: AV1 redPC blue yellow (twice)With the equipment turned OnSelect the external inputDisplays the selected connectorAV1 AV2/S-videoAV3/S-videoAV4/S-videoComponent/PCHDMI1/HDMI2• When colour bar disappears Press any coloured buttons• You can also select the connector using the TV/AV button on the front panel of the TV.Press the button repeatedly until you reach the connector to view.Panasonic equipment connected to the TV can be directly operated with the remote control.∗The remote control will be available for various Panasonic equipment with the following settings.Switch to select VCR or DVD you want to changePress and hold whileoperatingEnter the code below(two digit code) PressNote• After setting, execute operation confirmation.• The respective VCR / DVD code is turned to the default when battery has been exchanged. Set it again.• Depending on the model, operation may not be possible.VCREquipment CodeVCR 10 (default)DVD 11DVDEquipment CodeDVD 70 (default)Player theatre 71